Bizerba EC II 100 User Manual

Operating instruction EC II Maintenance
9 − 1
6.107.98.5.01.44
9 Maintenance
9.1 Cleaning
The cleaning instructions must be observed during installation, operation and
maintenance.
_______________________________________________________________________
CAUTION Wrong detergent!
Damage of the device surface.
Do not use spirit, acetone or agressive cleaning or scouring agents.
_______________________________________________________________________
_______________________________________________________________________
CAUTION Cleaning!
Penetrating water may cause damage to the device.
Make sure that no water runs into the device when cleaning.
_______________________________________________________________________
Use warm water with dish−washing detergent (food safe) for cleaning. Use a soft, non−fraying
cloth, moistened lightly.
9.2 Servicing
Remove loose dirt from beneath the load plate at 4−weekly intervals.
To do this, remove the load plate and remove loose dirt with a brush or vacuum cleaner.
Replace the load plate and check the zero point of the scale. Switch the scale off and on if
necessary.
Testing the weight display
Place reference weight of 2x3 kg on the scale and read off the display at 3 and 6kg.
This test must be repeated at regular intervals.
9

Bizerba EC II 100 Specifications

General

Brand	Bizerba
Model	EC II 100
Category	Scales
Language	English