1
2
1
3
Operating instruction EC IIInstallation
4 − 2
6.107.98.5.01.44
4.2.3 Leveling
To compensate for an uneven scale supporting area, the scale may be levelled via its foot
screws with the aid of a spirit level.
_______________________________________________________________________
After each change of location, the scale must be re−leveled.
_______________________________________________________________________
Fig.: EC II
1
Spirit level
2
Foot screws
3
Air bubble
Fig.: Leveling
Turn the foot screws
2
until the air
bubble
3
is located in the center of the
spirit level
1
.
4