2
1
T
kg Price / kg
kg
Price
T
kg Price / kg
kg
Price
Operating instruction EC II Operation
6 − 1
6.107.98.5.01.44
6 Operation
Fig.: Keyboard
1
Key <ON/OFF>
2
Key <Zero setting>
6.1 Switch device on
The scale should not be loaded.
Press key <ON/OFF> until a signal
sounds.
The display test is automatically run.
All figures and icons are displayed for
appox. 5 sec..
After that and with no weight on the
load receptor, the weight value display
moves automatically to zero ”0.000 kg”
and will be ready to operate.
6.2 Switch device off
Unintentional switch−off of the scale is not possible.
If key <ON/OFF> is pressed for a long time, “OFF 3” occurs on the display.
The scale counts backwards “OFF 3”− 2− 1.
After that the display turns black and the scale switches off.
Press the <ON/OFF> key until the
display goes dark.
If the key is released too soon, the scale will start the display test.
6.3 Reset device
Switching on the scale causes the weight display to move automatically to zero ”0.000” kg,
provided that there is no load on the load receptor.
The scale is equipped with an automatic zero setting device, small zero point drifts are
automatically compensated for.
With no load on the load receptor, the weight value display may be reset to zero (if deviating
from zero).
Press the <Zero setting> key.
6
To Next Page
Loading...
Need help?
General
