Operating instructions SC II Operation
61429850113 en-US 63 / 107
If free of charge, the PLU piece price can be multiplied by a partial piece number [}47].
6.22.1 n*quantity grad.
Observe the menu settings [}62].
n*quantity grad. is only supported for the PLU type "Weighed".
A specific proportion of weight of no charge (weight advantage) needs to be calculated from
a specifically entered weight value (threshold).
If the threshold value repeats itself, the limit of the weight advantage is correspondingly in-
creased in terms of the entered value.
Example:
When customer buys something greater than 0.300 kg, he is given 0.050 kg free of charge. If
customer purchases 0.600 kg, he is given 0.100 kg free of charge, etc.
Operating procedure
Place product on scale.
Call up PLU.
Register using operator key, e.g. <OP1>.
The "weight advantage" appears on the display with the corresponding negative amount.
Press the <Total> key.
Register and print using operator key, e.g. <OP1>.
A note, "weight advantage" including the corresponding weight, unit price, and negative
selling price is printed on the ticket.
6.22.2 n*amount grad.
Observe the menu settings [}62].
n*amount grad. is only supported for the PLU type "weighed".
A graded amount discount should be calculated based on the sales price and from a specifi-
cally entered weight value (threshold).
If the threshold value repeats itself, the limit of the graded amount is increased by the entered
value.
Example:
When buying 0.300 kg, customer is granted a discount of 0.50 EUR. If he buys 0.600 kg, he
is granted a discount of 1.00 EUR etc.
To Next Page
Loading...
Need help?
General
