Bizerba SC II Series - 6.25.3 PLU Type: Manual Fixed Weight

Operation Operating instructions SC II
70 / 107 61429850113 en-US
Enter number of pieces, e.g. 15.
Illustration54: Enter Number of pieces
Register using operator key, e.g.
<OP1>.
6.25.3 PLU type: "Manual fixed weight"
Only supported in price labeling mode (country-specific).
Menu setting
- In configuration, activate "Price Labeling" in the Operating mode menu and "Weight for
fixed price PLU" either with or without weight printout in the Printer menu.
- In PLU maintenance, enter the PLU type "Manual FW" and the fixed weight in "Tare
+Weight". Switch "Unit price return account" on or off.
Operating procedure
1
Without unit price return calculation
Illustration55: Without unit price return cal-
culation
2
Price labeling
Call up the "Manual fixed weight" arti-
cle, e.g. <PLU 2>.
3
With unit price return calculation
Illustration56: With unit price return calcula-
tion
4
Price labeling
The selling price can be overwritten.
Multiplication is supported.
Enter number of pieces, e.g. 3.
Illustration57: Enter Number of pieces
Fixed weight and selling price correspond to
3 pieces
5
.
Register with operator key, e.g.
<OP1>