Operating instructions SC II Troubleshooting
61429850113 en-US 83 / 107
Text message Cause Remedy
Max. value overflow – Appears during sales. – Check the settings for to-
tals in sales limits in
"Configuration" / "Device
settings" / "Sales limits".
End of month is still active! – Appears when an ongo-
ing monthly evaluation in
connection with time
recording is interrupted by
having switched off the
scales.
– The monthly evaluation
can be reapproved in the
"Additional functions" /
"Time recording" / "End of
month" menu.
End of paper!
Automatic paper ejection and
feed
– Appears for receipt print-
ers if the ticket paper runs
out during a printout.
– The paper is ejected au-
tomatically.
Insert new paper.
The paper is pulled in au-
tomatically.
Printing is repeated.
– Insert paper correctly.
Automatic paper ejection and
feed
End of paper!
Continue with label printing,
ticket printing or label printing
on ticket paper?
– Appears for label printers
if the labels run out during
a printout.
– Insert new label or ticket
roll.
Depending on the paper
used, select with the cur-
sor:
– Label printing, for la-
bels
– Ticket printing, for
ticket paper
– Label printing on ticket
paper, for endless ad-
hesive paper.
– Insert paper correctly.
PLU not found – Appears during sales. – Check the selected PLU
in PLU maintenance.
– Enter the correct PLU no.
– Check menu items "PLU
access via department"
and "EAN/UPC access
via dept.".
Note department organi-
zation. Select 5 3 5
To Next Page
Loading...
Need help?
General
