BK Precision 2190E User Manual

136
 Taking Automatic Measurements
The oscilloscope can take automatic measurements of most
displayed signals. To measure signal frequency and peak-to-peak
amplitude, follow these steps:
Measure signal frequency
1. Input the signal to channel 1.
2. Press the “AUTO” button.
3. Press the “MEASURE” button to see “Auto Measure
Menu”.
4. Press the top option button.
5. Press the “Time” option button to enter the “Time
Measure menu”.
6. Press the “Source” option button to select input signal
channel.
7. Press the “Type” option button to select “Freq”.
The corresponding icon and measure value will display on the
third option area.
Measure signal frequency
1. Press the “MEASURE” button to display “Auto Measure
Menu”.
2. Press the top second option button.
3. Press the “Voltage” option button to enter the “Voltage
measure menu”.
4. Press the “Source” option button to select input signal
channel.
5. Press the “Type” option button to select “Vpp”.
The corresponding icon and measure value will display on the
third option area.
4.2 Taking Cursor Measurements
 Measuring Ring Frequency
To measure the ring frequency at the rising edge of a signal,
follow these steps:
1. Press the “CURSORS” button to see the “Cursor Menu”.
2. Press the “Mode” button to select “Manual”.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

BK Precision 2190E Specifications

General

Brand	BK Precision
Model	2190E
Category	Test Equipment
Language	English