BK Precision 2190E User Manual

19
V/div
Adjusted
VOLTS/DIV adjustability
Coarse
Signal inverted
Off
Horizontal position
Center
Time/div
Adjusted
Trigger type
Edge
Trigger source
Auto detect the channel which has the
input signal
Trigger slope
Rising
Trigger mode
Auto
Trigger coupling
DC
Trigger holdoff
Minimum
Trigger level
Set to 50%
NOTE: The AUTO button can be disabled. Please see “Education
Mode” for details.
3.4 Default Setup
The oscilloscope is set up for normal operation when it is shipped from the
factory. This is the default setup. To recall this setup, press the DEFAULT
SETUP button. For the default options, buttons and controls when you
press the DEFAULT SETUP button, refer to “Table 3.3 – Default Setup
Table” below.
The DEFAULT SETUP button does not reset the following settings:
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

BK Precision 2190E Specifications

General

Brand	BK Precision
Model	2190E
Category	Test Equipment
Language	English