BK Precision 4050B Series - Example 6: Generate a DC Waveform

108
Example 6: Generate a DC Waveform
Generate a 3 V DC waveform.
⚫ Choose the DC waveform.
1. Press Waveforms →Page 1/2→ DC to choose the DC waveform.
⚫ Set the Offset.
1. Press Offset and choose Offset which will display in a blue color.
2. Input ‘3’ from the keyboard and choose the unit ‘Vdc’. The DC offset is set to 3 V.
When the DC offset is set, the waveform generated is shown in Figure 79.
Figure 78 - Generate a Noise Waveform