35
Follow the steps below to browse and select a predefined arbitrary waveform.
1. Press the Waveforms button.
2. Go to the second page of waveform options by pressing the 1/2 . softkey. .
3. Select and press the Arb softkey from the menu.
4. Select Built-in from the parameter menu and there will be a table on the display area
showing the available built-in waveforms. The menu will display the waveform
categories: Common, Math, Engine, etc.
5. After selecting the category (selected category will be highlighted in blue), use the
rotary knob to select the desired predefined waveform (selected waveform will be
highlighted in white).
To Next Page
Loading...
