BK Precision 5492B User Manual

SCPI Command Reference
68
CONFigure Command
Command syntax:
:CONFigure:<function>
Command parameter :
<function> = VOLTage:DC DC voltage
VOLTage:AC AC voltage
CURRent:DC DC current
CURRent:AC AC current
RESistance 2-wire resistor
FRESistance 4-wire resistor
FREQuency Frequency
PERiod Period
DIODe Diode testing
CONTinuity Continuity test
Query:
:CONFigure? Query the selected function.
Return String Example:
volt:dc
Description:
This command configures the instrument for subsequent measurements on the specified function. It
places the instrument in the selected measurement mode. You then use the :READ? command to
trigger a measurement and acquire a reading.
When this command is sent, the multimeter will be configured as follows:
 The function specified by this command is selected.
 All controls related to the selected function are defaulted to the *RST values.
 Continuous initiation is disabled.
 The control source of the Trigger Model is set to Immediate.
 The delay of the Trigger Model is set to zero.
 All math calculations are disabled.
 Buffer operation is disabled. A storage operation currently in process will be aborted.
 Autozero is set to the *RST default value.
This command is automatically asserted when the :MEASure? Command is sent.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

BK Precision 5492B Specifications

General

Brand	BK Precision
Model	5492B
Category	Multimeter
Language	English