ServSwitch Agility Dual with VNC
724-746-5500 | blackbox.com
Page 36
4.12 Virtual Media
The Virtual Media feature allows you to remotely make files available to a host computer that is linked to the Agility Dual with
VNC. Disk drives, single files or collections of files and folders up to 2GB in size can be mounted via the VNC link, and appear as a
read-only disk on the host. This can prove to be an invaluable tool when upgrading host computers from remote positions.
Note: The file transfer is in one direction only, from viewer to host.
Note: Virtual Media does not currently work with Apple Mac systems.
In order to use the Virtual Media feature, the VM link must be made between the Agility Dual with VNC and a USB port on the
host computer.
There are two main ways to use Virtual Media:
•Createaread-only‘virtualdiskdrive’onthehostfromoneormorefileschosenattheviewerend.Thisisusefulforcopying
one or more files from the computer running the VNC viewer to the host computer. See below.
•Exportadiskdrive(e.g.CD,DVDorUSBflashdrive)fromtheviewercomputersoitappearsasadiskonthehostattachedto
Agility Dual with VNC. A particular use for this is for booting or upgrading the remote host from a CD or other media that you
have at the viewer end.
4.12.1 Remotely transferring files to the host as a virtual disk drive
There are several methods of doing this. The easiest method depends on whether:
• Thefilesarealreadyontheclipboardoftheviewercomputer(followinganEdit -> Copy operation). See To remotely transfer
files from the clipboard >>
or
• Thefilesstillneedtobeselected.SeeTo select and remotely transfer files from the viewer computer >>
To Next Page
Loading...
Need help?
General