Black Box ACR1012A-T User Manual

Chapter 3: Installation
724-746-5500 | blackbox.com
Page 17
3.2.4 Local USB Link
All ServSwitch Agility units act as USB 2.0 hubs and so can provide four sockets at the Remote unit with only a single connection
at the Local unit.
1 Connect the type B connector on a USB cable to the USB port on the Local unit rear panel:
OPTIONS
1 2
1
2
Connect the USB link cable to Local unit socket.
2 Connect the type A connector of the cable to a vacant USB socket on the host computer.
USB link from
host computer

Black Box ACR1012A-T Specifications

General

Brand	Black Box
Model	ACR1012A-T
Category	Switch
Language	English