Page 116
724-746-5500 | blackbox.com
Chapter 4: Configuration
Table 4-21. Date and time settings.
Field Selection Description
SNTP Client
activated Enable network time server synchronization
deactivated Function not active (default)
SNTP Server Byte Input of the SNTP server IP address (default: 000.000.000.000)
Month 1–12 Enter month
Date 1–31 Enter date
Year 1–99 Enter year
Day 1–7 Enter day of the week
Hours 0–23 Enter hour
Minutes 0–59 Enter minute
Seconds 0–59 Enter second
OSD
Select “Configuration > Date+Time” in the main menu.
Figure 4-32. Menu Configuration—Date and Time screen.
To Next Page
Loading...
Need help?
General
