Page 117
724-746-5500 | blackbox.com
Chapter 4: Configuration
NOTE: Date format according to the English notation.
To configure a time server, proceed as follows:
1. Set the option SNTP Client to Y (Yes).
2. Enter the IP address of your SNTP server in the field SNTP Server.
3. Select your time zone in the field Time Zone.
4. Press the “OK” button to confirm your settings.
5. Restart the matrix. The system time will be now be by the SNTP server.
To set the real time clock without using SNTP, proceed as follows:
1. Set the current date in the field Date.
2. Set the current Day in the field Day.
3. Set the current time in the field Time.
4. Press the “RTC” button to confirm your settings.
Java
Select System > Date and Time in the main menu.
Figure 4-33.
To Next Page
Loading...
Need help?
General
