Page 152
724-746-5500 | blackbox.com
Chapter 4: Configuration
You can access the menu in two ways: via OSD or Java.
Figure 4-64. OSD and Java icons.
OSD
Via “Configuration > CON Macros” in the main menu, select the console for
which a console macro has to be created.
Figure 4-65. Menu Configuration - CON Macros
To create a macro for the selected console, proceed as follows:
1. Select the number key (1–16) for which a macro has to be created.
2. Select the respective place on the list (1–16) of the key that has to be set with a
macro key.
3. Select a macro command in the “Macro Data” field from the macro list.
4. Set the necessary parameters P1 and P2 (for example, CON Devices or CPU
To Next Page
Loading...
