3 Headphone Port
Connect a set of headphones to the 1/4” headphone jack on the front panel to listen to
the audio. To change the headphone volume level, tap on the volume meters on the
touchscreen display and adjust the ‘headphone level’ slider.
4 Touchscreen
The 7” LCD display features a large ultra bright HDR video display with intuitive touchscreen
controls. The wide color gamut displays both Rec. 2020 and Rec. 709 color spaces and
100% of the DCI-P3 format. You can also display full screen video scopes. You can access
all available on screen controls and menu options via the touchscreen display!
For more information on the menu settings and using the touchscreen, see the
‘touchscreen display’ section later in this manual.
5 CFast 2.0 Card Slots
2 CFast slots on the front of the panel for your CFast cards. LED lights to the right of the
slotindicate the media status.
Playback
Recording or while cache is transferring
Card is ready or no card is installed
HyperDeck Extreme Rear Panel
6
8
11
12
13
15
16
17
14
7
9
10
Rear connections on HyperDeck Extreme 8K HDR
6 Power
There are two power options on the rear, an AC power input for IEC mains power input as
well as a 12V 4 pin XLR DC input for connecting redundancy or battery power. Ensure any
DC power source connected to the units is compatible with the input voltage and current
rating marked at the DC IN connector
13HyperDeck Extreme Rear Panel
To Next Page
Loading...