Blackmagic HyperDeck Setup
Using HyperDeck Setup
Blackmagic HyperDeck Setup is used to change settings and update the internal software
in your HyperDeck.
To use HyperDeck Setup:
1 Connect HyperDeck to your computer via USB or Ethernet.
2 Launch HyperDeck Setup. Your HyperDeck model will be named in the setup
utility home page.
3 Click on the circular ‘setup’ icon or the image of your HyperDeck to open the setup page.
80Blackmagic HyperDeck Setup
To Next Page
Loading...