Blackmagicdesign HyperDeck Extreme 8K HDR User Manual

Plugging the 8K quad link SDI output of a HyperDeck Extreme 8K HDR into the SDI input of the
ATEM Constellation 8K.
HyperDeck Extreme 8K HDR - Two Sample Interleave
There are two different methods for 8K workflows; two sample interleave and square
division. HyperDeck Extreme 8K HDR and ATEM Constellation 8K both use two
sample interleave, known as 2SI. With 2SI, each 12G-SDI connection delivers an 8K
signal at 1/4 of the resolution. When combined, you have a full resolution 8K signal!
A benefit of the 2SI method is that if one of the 4 connections become loose, you will
only lower the resolution rather than lose one corner of the image, as would be the
case in a square quadrant setup.
AA BB AA BB
CC DD CC DD
AA BB AA
8K
BB
CC DD CC DD
If your 8K workflow involves devices using the square division method, your can use
Teranex Mini SDI to HDMI 8K HDR to convert automatically from 2SI to square division.
16HyperDeck Extreme Rear Panel

Blackmagicdesign HyperDeck Extreme 8K HDR Specifications

General

Brand	Blackmagicdesign
Model	HyperDeck Extreme 8K HDR
Category	DVR
Language	English