Audio Page 4
Swipe the audio tab to the 4th page to view the XLR output audio meters and adjust the output
levels using the slider controls. The type of audio meter displayed depends on the meter
selected via the last audio page. XLR audio outputs can be used to connect audio to other
devices such as the ATEM Constellation 8K switcher.
Adjust the XLR output levels using the slider beneath
Audio Page 5
Monitor Channels
When recording more than two channels, you can select a second pair of channels you want to
see on the front panel via the monitor channels option. This setting also sets which channels of
audio will play back through the front panel speaker and headphones connection.
35Settings
To Next Page
Loading...
Need help?
General
