Setup Page 5
Filename Prefix
When first set up, HyperDeck Extreme will record clips to your CFast or USB Flash disk using
the following filename convention.
HyperDeck_0001
HyperDeck_0001 Filename Prefix
HyperDeck_0001 Clip Number
You can edit the filename of your recorded files by tapping the ‘edit’ pencil icon. A touchscreen
keyboard will appear. Type in the filename prefix.
Timestamp File Suffix
The timestamp added to the filename is turned off by default. If you would like the date and
time recorded in your filename, toggle the ‘timestamp file suffix’ option to on. Make sure the
date and time is set correctly, either via the touchscreen setup menu or by using the Blackmagic
HyperDeck Setup utility.
42Settings
To Next Page
Loading...
Need help?
General
