Blackmagicdesign HyperDeck Studio - Retrieving Clip Information

Developer Information
65
recording time: {recording time available in seconds}↵
video format: {disk's default video format}↵
↵
Asynchronous slot information change notification is disabled by default and
may be configured with the "notify" command. When enabled, changes in
slot state will generate a "502 slot info:" asynchronous message with the same
parameters as the "202 slot info:" message.
Retrieving clip information
The "disk list" command returns the information for each playable clip on a
given disk. Without parameters, the command returns information for the
current active disk:
disk list↵
If a slot id is specified, the disk in that slot will be queried:
disk list: slot id: {Slot ID}↵
The server responds with the list of all playable clips on the disk in the format
of: Index, name, formats, and duration in timecode:
206 disk list:↵
slot id: {Slot ID}↵
{clip index}: {name} {file format} {video format} {Duration
tim ecode}
↵
{clip index}: {name} {file format} {video format} {Duration
tim ecode}
↵
…
↵
Note that the clip index starts from 1.
Retrieving clip count
The "clips count" command returns the number of clips on the current timeline:
clips count ↵
The server responds with the number of clips:
214 clips count: ↵
clip count: {Count}↵