Panel Lock / Power / Remote Lock
PANEL LOCK Button
The PANEL LOCK button allows you to lock the control panel to prevent accidental changes to system
settings. To activate or deactivate, press and hold the button for 3 seconds. When locked, the PANEL LOCK
button will be red. If the button is not held long enough to lock or unlock the panel, the button will flash
three times and you should try again.
Power Switch
Press the power switch to power ON the system. Press and hold for three seconds to power OFF. If the
button is not held long enough, the button will flash three times and you should try again.
REM LOCK Button
REM LOCK prevents a remote device from connecting to and controlling this chassis via ethernet.
To activate or deactivate, press and hold the button for 3 seconds. When locked, the REM LOCK
button will be red. If the button is not held long enough to lock or unlock the panel, the button will flash
three times and you should try again.
To Next Page
Loading...
