Using Blackmagic UltraScope
97
What is Blackmagic UltraScope?
Now with Teranex 2D Processor, you get the incredible features of Blackmagic UltraScope which you can
even use with compatible iMac and MacBook Pro notebook computers with Thunderbolt technology!
Blackmagic UltraScope software is installed by the Teranex 2D Processor Installer.
Previously broadcast quality television and post production scopes were incredibly expensive custom
solutions that only let you see one scope at a time on a tiny screen! Some scopes look ugly and don’t really
look good in front of your client. With Blackmagic UltraScope, you get 6 wonderful scopes that let you see
all aspects of your converted video signals!
Blackmagic UltraScope is perfect for quality control checks of the converted output of your Teranex 2D
Processor no matter which SDI, HDMI, component analog or composite analog video input you use. Simply
connect a Thunderbolt cable between your Teranex 2D Processor and a Mac computer and away you go!
Installation Requirements for Mac OS X
Teranex 2D Processor connects to Mac OS X computers with Thunderbolt technology.
The Blackmagic UltraScope software interface requires a computer display with a minimum resolution of
1280 x 800 pixels to view two scopes simultaneously. Blackmagic Design recommends viewing all 6 scopes
simultaneously by using a computer display resolution of 1920 x 1200 or 1920 x 1080 pixels.
Please see the support pages at www.blackmagicdesign.com for a comprehensive list of the latest, minimum
system requirements for Blackmagic UltraScope for Mac.
To Next Page
Loading...
Need help?
General
