Blackmagicdesign Teranex 2D Processor User Manual

Understanding the LCD Menus
68
Video Setup Menu
The Video Setup menu allows you to define the type of analog video being used for the input and
output video connections on the rear panel. The choice will be either composite or component.
This menu is also used to define which video signal will be output when there is a loss of input video.
 No Input – Allows you to define the video signal that the processor will output when input video
is lost
 Input Analog – Allows you to define the type of input analog video that you are using
 Output Analog– Allows you to define the type of output analog video that you are using
No Input Menu
This menu allows you to define whether Black or Colorbars will be output when there is a loss of input
video.
 The default setting is Black.
Input Analog Video Setup Menu
This menu allows you to define the type of input analog video that you are using.
 Component – Defines the analog input BNC connections as component Y, R-Y and B-Y.
 Composite – Defines the analog Y/NTSC/PAL input BNC connector as composite.
 The default setting is Component.
Main Menu
Back
Setup
Ancillary
Data
Noise
Reduction
Video
1
Main Menu
Setup
Back
Audio
Video
Reference
2
Setup
Colorbars
Black
No Input
Back
Output
Analog
Input
Analog
No Input
3
Video / No Input
Main Menu
Back
Setup
Ancillary
Data
Noise
Reduction
Video
1
Main Menu
Setup
Back
Audio
Video
Reference
2
Setup
Composite
Component
Analog Input
Back
Output
Analog
Input
Analog
No Input
3
Video / Input Analog

Blackmagicdesign Teranex 2D Processor Specifications

General

Brand	Blackmagicdesign
Model	Teranex 2D Processor
Category	Media Converter
Language	English