Blink WE-30C - Page 19

OM0001_L2_R_WM_USAv2.1 15
Step 1 (continued)
Once Network Setup is complete, your Blink charging system automatically performs a network test,
confirming that all of the settings are correct.
 Touch Continue
to proceed to Step 2.
If the Network Test fails:
 Touch Skip to resolve
the issue later.
 Touch Restart Setup to
check and correct the
network settings.
 Touch Retry Test to try
again.
If you cannot resolve the
problem yourself, please
contact Blink support.
tip If a network
test fails, touch the
name of the test to
go directly to the
setup step for that
setting and correct
it.