48 OM0001_L2_R_WM_USAv2.1
Power issues
Power outages
Your Blink charging system is designed to handle power outages. When power resumes, your Blink
charging system automatically powers back up, then displays the calibration screen described on
page 5.
Touch the screen anywhere to begin calibration.
If the screen is not touched within the timeout period, your Blink unit skips the calibration
step, applies the last saved calibration settings, and displays the Welcome screen below.
The Welcome to Blink screen appears.
Touch Charge Now
to return to the Main
screen and resume normal
use. Otherwise, your Blink
charging system will wait
15 minutes then will go to
the Main screen
automatically.
To Next Page
Loading...
