EasyManua.ls Logo

Blink WE-30C - Important Safety Instructions

Blink WE-30C
63 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OM0001_L2_R_WM_USAv2.1 1
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Before using the Blink Electric Vehicle Supply Equipment (EVSE), hereafter called “charger” or
“charging system”, read all of these instructions, as well as the WARNING and CAUTION markings
in this document, on the charger, and on your vehicle.
Legend
WARNING: Used when there is a risk of personal injury
WARNING: RISK OF ELECTRIC SHOCK Used when there is a risk of electric shock
WARNING: RISK OF FIRE Used when there is a risk of fire
CAUTION: Used when there is a risk of damage to the equipment
WARNING: RISK OF ELECTRIC SHOCK
Basic precautions should always be followed when using electrical products, including the
following:
a. Read all the instructions before using this product.
b. This device should be supervised when used around children.
c. Do not put fingers into the electric vehicle connector.
d. Do not use this product if the flexible power cord or EV cable is frayed, has broken
insulation, or any other signs of damage.
e. Do not use this product if the enclosure or the EV connector is broken, cracked, open, or
show any other indications of damage.
f. MODELS WE-30C GROUNDING INSTRUCTIONS: (Cord-connected models) This
product must be grounded. If it should malfunction or breakdown, grounding provides a
path of least resistance for electric current to reduce the risk of electric shock. This
product is equipped with a cord having an equipment grounding conductor and a
grounding plug. The plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and ordinances.

Table of Contents

Related product manuals