56 OM0001_L2_R_WM_USAv2.1
Check connectors
If operating, stop the charger and disconnect the connector from the vehicle.
Visually inspect the Blink connector – verify that the connector handle assembly is
undamaged, with no broken or chipped plastic parts. Verify that terminals are straight and
undamaged and that the connector fits firmly and is secure in the vehicle receptacle.
Inspect your Blink unit’s connector terminals on the charging cord – look for dark
discoloration or corrosion. Verify that the terminals are straight and undamaged. Have any
necessary repairs performed by a qualified Blink service representative.
Refer to your vehicle’s manual for inspection and maintenance information on the vehicle
inlet. We recommend that you inspect the connector receptacle and terminals in your
vehicle. If the terminals are corroded or damaged in any way, have them repaired by a
qualified vehicle service facility.
To Next Page
Loading...
