blu3 Nomad - Removing the Dive Harness

35
The user must always be prepared to completely remove the Dive Harness. In case of
underwater entanglement, the user may be required to remove the Dive Harness rather than aempt to free
the Dive Harness or Air Hose from an entanglement. Another situaon in which the user may need to quickly
remove the Dive Harness is if a boat snags the Air Hose and pulls Nomad and the diver.
Prior to your rst dive, pracce the following instrucons unl you have prociency in removing the Dive Harness
and always be prepared to remove the Dive Harness while diving. Refer to the BLU3 Online Dive Training Course for
further instrucons on how to remove the Dive Harness.
1. Using your right hand, locate the small buckles on the Chest Strap.
2. Unclip the buckles of the Chest Strap immediately upon locang the buckle with your right hand by
pressing in on the prongs of the male buckle.
Unclipping the Chest Strap using right hand
3. Using your le hand, locate the mated large buckles of the Dive Harness near the le shoulder.
4. Unclip the buckles of the Dive Harness immediately upon locang the buckle with your le hand by
pressing in on the prongs of the male buckle.
5. Push excess lengths of the Dive Harness away from your body and remove all potenal entanglements
with your body.
6. Make a safe ascent to the surface using the emergency diving techniques taught in the BLU3 Online Dive
Training Course.
Unclipping the large buckle using le hand
(
(
9.2 Removing the Dive Harness