blu3 Nomad - Estimating Number of Dives on Nomad

49
14.2 Esmang Number of Dives on Nomad
The DiveOMeter is a feature designed to inform the user of how many dives the Nomad
has performed. This informaon is important for scheduling roune maintenance. The DiveOMeter uses
audible beeps to indicate the esmated number of dives.
1. Unplug the Baery for at least 10 seconds.
2. Turn the Smart Reg Knob to the ON posion.
3. Connect the Baery to the Nomad Power Cable.
4. Perform steps 5-8 within the rst 10 seconds aer
connecng the Baery.
5. Turn the Smart Reg Knob to the OFF posion.
6. Turn the Smart Reg Knob to the ON posion.
7. Turn the Smart Reg Knob to the OFF posion.
8. Turn the Smart Reg Knob to the ON posion.
9. Listen for the rst three-digit audible beep coming from Nomad.
A zero will be represented by 5 fast, low-pitched beeps.
10. If you need assistance with esmang the number of dives, please send us an email
at support@diveblu3.com. If possible, please include a video of the beeps and we can
interpret the beeps for you.
The DiveOMeter is not precise and the actual number of dives will vary depending on the user, environmental
condions, and other factors. Use the DiveOMeter table only for an approximaon of the number of dives.
Follow these instrucons to acvate the DiveOMeter: