blu3 Nomad - Troubleshooting; If Nomad is Beeping an Error Code

48
Disassembly of Nomad is not permied by the user. Follow only the instrucons in this secon for
troubleshoong. Do NOT disassemble or modify any components that are beyond the scope of this Users
Manual.
14.1 If Nomad is Beeping an Error Code
Upon startup, Nomad will make a musical startup tone that is made up of four changing,
high-pitched beeps. If other beeps occur prior to the startup tone, take note of how they sound and how
many beeps occur. If you need to hear the beeps again, unplug the Baery for at least 5 seconds then plug
it back in.
Error Code Meanings:
14 Troubleshoong
Number of Beeps Prior
to Startup Tone
Meaning
1
Air ow is beginning to decline. Baery is geng low. Charge the Baery before diving.
2
Air ow is moderately reduced. Baery is close to fully depleted. Charge the Baery before diving.
3
Air ow is extremely low. Baery is depleted. Charge the Baery before diving.
8
ERROR Code: Smart Reg needs to be calibrated. Do NOT operate Nomad. Refer to diveblu3.com/support