ACM200 USER MANUAL
48 www.blustream.co.uk / www.blustream.com.au
Status feedback samples
Command: STATUS
The STATUS feedback gives an overview of the network the ACM200 is connected to:
================================================================
IP Control Box ACM200 Status Info
FW Version: 1.14
Power IR Baud
On On 57600
In EDID IP NET/Sig
001 DF009 169.254.003.001 On /On
002 DF016 169.254.003.002 On /On
Out FromIn IP NET/HDMI Res Mode
001 001 169.254.006.001 On /O 00 VW02
002 002 169.254.006.002 On /O 00 VW02
LAN DHCP IP Gateway SubnetMask
01_POE O 169.254.002.225 169.254.002.001 255.255.000.000
02_CTRL O 010.000.000.225 010.000.000.001 255.255.000.000
Telnet LAN01 MAC LAN02 MAC
0023 34:D0:B8:20:4E:19 34:D0:B8:20:4E:1A
================================================================
Command: OUT xxx STATUS
The OUT xxx STATUS feedback gives an overview of the output (Receiver: xxx). Including: firmware, mode, fixed rout-
ing, name etc.
================================================================
IP Control Box ACM200 Output Info
FW Version: 1.14
Out Net HPD Ver Mode Res Rotate Name
001 On O A7.3.0 VW 00 0 Receiver 001
Fast Fr Vid/Aud/IR_/Ser/USB/CEC HDR MCas
On 001 001/004/000/000/002/000 On On
CEC DBG Stretch IR BTN LED SGEn/Br/Bit
On On O On On 3 O /9/8n1
IM MAC
Static 00:19:FA:00:59:3F
IP GW SM
169.254.006.001 169.254.006.001 255.255.000.000
================================================================
To Next Page
Loading...