BOCK FK40 Seroes - Leak Oil Collection Ring, Part No. 80019

Leak oil collection ring (Part No. 80019)
Remove the leak oil collection ring (see Fig. 1)
The repair kit contains two felt inlays (Pos. 2 and Pos. 3,
see Fig. 2)
If the bearing flange with one oil pocket is installed
Pos. 3 must be inserted (see Fig. 3)
If the bearing flange with six oil pocket is installed
Pos. 2 must be inserted (see Fig. 4)
If the wrong felt inlay, or both felt inlays, is inserted the
functioning of the oil collection system cannot be ensured.
Procedure:
Leak oil collection ring
Fig. 3
Fig. 4
Open at bottom
1
2
1
3
Type code 001
Starting from type code 007
Fig. 1
Bearing flange with
one oil pocket
Bearing flange with
six oil pockets
Open at top
09608-09-03-DGbFEI
- 18 -
123
Fig. 2