Step
Removal of the shaft seal
Parts list position: 2010
Tools: Oil collection container, Allen key 6 mm
Pos. in
parts list
Working course
Place the oil collection container under the shaft seal area.
Remove the leak oil collection device from the bearing flange
Unscrew the cylinder screws
4
Watch out! The shaft seal cover is under spring tension! It may jump
out by itself.
Remove the shaft seal cover, the guide ring, the O-ring and the spring.
Fig. 15a
Fig. 15b
09608-09.03-DGbFEI
- 30 -
For a detailed description see also the section on the Removal of the shaft seal on page 19!
2110
750
2010
To Next Page
Loading...