Page
Contents
39 Checking the components of the compressor for damage / wear
39 Limiting values for wear
39 Cylinder liners
39 Crankshaft
40 Pistons
40 Connecting rods
40 Valve plates
40 Oil pump
41 Oil filter / suction filter
41 Internal safety valve
42 Assembly of the compressor
42 1 Fitting the roller bearings
43 2 Fitting the sight glass, the plugs and the internal safety valve
44 3 Assembly of the pistons / connecting rods
45 4 Fitting the piston / connecting rod sets
46 5 Fitting the crankshaft
47 6 Installation of the front bearing flange
48 7 Assembly of the inserted connecting rods / pistons
49 8 Installation of the oil pump
50 9 Fitting the shaft seal
51 10 Installation of the baseplate
52 11 Installation of the oil filter
53 12 Installation of the cylinder cover and valve plates
54 13 Installation of the shut-off valves and blind flanges
55 Checking the compressor
55 Tightening torques for screws
56 Spare parts list
58 Repair kits parts list
59 Parts list for optional accessories
60 Exploded drawing
- 4 -
09608-09.03-DGbFEI
To Next Page
Loading...