Bosch Access Easy Controller 2.1 - Page 128

128 en | Appendix G Blank Configuration Form Access Easy Controller 2.1
2018.11 | 1.0.6 | F.01U.122.796 Hardware Installation Manual Robert Bosch (SEA) Pte Ltd
SW1 Address Settings:
T4-4 to T4-6
T5-1 to T5-3
T5-4 to T5-6
Prepared By: ______________
Date: _________
AEC2.1 Boards Configuration Page ____ of ____
8-IO Board
SW1 Address Settings:
Input Channels Device Connected / Description (e.g. PIR at Warehouse)
T6-1 and T6-2
T6-3 and T6-4
T6-5 and T6-6
T6-7 and T6-8
T7-1 and T7-2
T7-3 and T7-4
T7-5 and T7-6
T7-7 and T7-8
Output Channels Device Connected / Description (e.g. Alarm Status for PIR)
T2-1 to T2-3
T2-4 to T2-6
T3-1 to T3-3
T3-4 to T3-6
T4-1 to T4-3
T4-4 to T4-6