14
Unpacking and Checking Contents
Unpacking the Miter Saw – When removing this
tool from packaging materials, reach down to the
t
wo side carry-handle locations and slowly lift until
it clears the package.
T
o avoid severe pinching,
never lift or move this saw by
gripping any component of the mechanism
support system.
This symbol is placed at various
locations on the tool to warn the user
of pinch-point areas.
Checking Contents in Package – Open the top of
t
he package and look for the included loose parts.
Refer to the diagram below.
Some small parts such as the bevel lock lever and
miter lock knob require attachment to the tool
before it is ready for use – See “Attaching Loose
P
arts” on page 16.
To avoid possible injury,
always disconnect plug from
power source before performing any assembly,
adjustments or repairs.
To Next Page
Loading...
