Bosch D9068 - Page 55

D9068 | Operation and Installation Guide | Appendix B: 4/2 Reporting Codes
.
Bosch Security Systems, Inc. | 3/13 | F01U071094-07
55
Table 13: 4/2 Reporting Codes (Continued)
4/2 Report
Code
Keypad
Number Key
Group
Number
Definition
TRBL INP RPT
[9]
3
Trouble Input Report. Sent when system fault input is
active.
TRBL INP RST
[1]
4
Trouble Input Report Restore. Sent when system fault
input restores.
ANALOG SERVC
[2]
4
Analog service.
ANALOG RESTR
[3]
4
Analog restore.
EQUIP FAILR
1
[4]
4
Equipment Failure.: Sent for equipment failure problems.
EQUIP RESTOR
1
[5]
4
Equipment Restore. Sent for equipment failure problems.
NETWORK FAIL
1
[6]
4
Network Failure. Sent for network failure problems.
NETWORK RSTR
[7]
4
Network Restore. Sent for network failure problems.
SENS BUS RPT
1
[8]
4
Sensor Bus Report.
SENS BUS RST
[9]
4
Sensor Bus Restore.
RMT PGM FAIL
2
[1]
5
Remote Programming Failure. Sent when there are problems
with remote programming.
RMT PGM SUCC
2
[2]
5
Remote Programming Success. Sent when remote programming
is successful.
UNKNOWN FALT
[3]
5
Unknown Fault. Sent for problems of an unknown nature.
1 Item is sent only when the D9068 is configured to communicate with a Bosch Security Systems, Inc.
D8024 or D10024/D10024A Analog FACP.
2 Item is for future use.