Bosch D9068 - User Manual

EN
Operation and
Installation Guide
Fire Communicator
D9068

Summary

Notices

FCC Compliance Notice

Describes equipment testing and FCC rules.

2.0 Installation

2.1 Mounting the Enclosure

Provides instructions for mounting the D9068 enclosure.

2.2 Connecting the D9068

Details the procedures for connecting the D9068 to various components.

2.2.1 Input Point Connections

2.2.2 Trouble Relay Connections

2.2.3 Analog FACP Connections

Explains how to connect the D9068 to Bosch Analog FACPs.

2.2.4 Telephone Connections

Provides instructions for installing telephone cords for the D9068.

Connecting the Keypad to the D9068

3.0 System Start Up

3.1 System Power-up

Describes the sequence of events when first powering up the D9068.

3.1.1 Before Power-up

4.0 System Operation

3.2 System Quick Start

4.1 Communicator Operation

Explains how the D9068 communicator sends reports to a monitoring station.

4.1.1 Phone Line and Phone Number Selection

Details how to program primary and alternate phone numbers for reporting.

Report Routing

4.1.2 Telephone Line Supervision

4.1.9 Communications Tests

Describes how to perform Auto Test and Manual Test for communication verification.

Auto Test

Manual Test

4.2 Input Point Operation

Explains how the D9068 inputs are configured and operate.

4.3 Trouble Relay Operation

4.4 Keypad Operation

4.4.1 D7033;FMR-DACT-KEYPAD Keypad Programmer

4.5 Reset

5.0 Programming

5.1 Using the Keypad

Guides on how to use the keypad for programming the D9068.

5.2 Programming Key Sequences

5.3 Program Menu Tree

Provides a hierarchical view of the D9068 programming options.

5.4 Programming the D9068

Introduces the programming features accessible via the keypad.

5.4.1 PROG TIME

Details programming for system date/time, auto test, and daylight saving.

5.4.2 PROG TIMERS

Covers programming for AC Fail Delay and Display Rate.

5.4.3 PROG INPUTS

Explains how to program the five available input points.

1: CONFIGURE

Details how to set the function for each input point.

2: SUPERVISED

5.4.4 PROG RELAY

1: RELEAS ON TRBL

5.4.5 PROG ACCNTS

Covers programming of account numbers and phone numbers for reporting.

1: ACCOUNT NUMS

2: PHONE NUMS

4: RPT STEERING

5.4.6 PROG FORMATS

Allows programming of reporting formats and codes for 4/2 formats.

1: 4;2 POINT RPT

2: RPT CODES

5.4.7 PROG DEFLTS

Covers resetting history, EEPROM, and default reporting codes.

1: CLEAR HISTORY

2: DEFAULT ALL EE

Restores the D9068 to its original factory programming configuration.

3: DEFLT 4;2 CDES

5.4.8 SERIAL CONECTN

Allows configuring the D9068 for serial connection to Bosch Analog FACPs.

5.5 Operating Modes

5.5.4 3- TEST

Explains how to initiate tests, specifically communication tests.

Appendix A: Troubleshooting

A.1 On-Board LEDs

Describes the function of the D9068's on-board LEDs for status indication.

A.2 Input Points

A.3 Trouble Relay

Appendix F: D8024;D10024;D10024 A Analog FACP Operation

F.2 Setup

F.2.1 D9068 to FACP Power Connections

F.3 Programming

Provides programming steps required for the D8024/D10024/D10024A for D9068 use.

F.3.1 FACP Programming

Details how to set the FACP's network address for D9068 communication.

F.3.2 D9068 Programming

F.4 Reporting Information

Covers general report information, restorals, and point events.

F.4.1 General Report Information

F.4.6 Analog FACP Event Code to D9068 Report Mapping

F.4.7 Reported Event to FACP Cause Mapping

Bosch D9068 Specifications

General

Brand	Bosch
Model	D9068
Category	Cell Phone
Language	English