Bosch Security Systems, Inc. | 3/13 | F01U071094-07
Note 1: Some codes are used for more than one event type.
Note 2: For SIA and Modem IIIa
2
, no area is reported.
Note 3: For contact ID, the area is 0.
Note 4: The point is reported as Points 1 to 5, corresponding to the five inputs.
Note 5: ppp and pppp are point numbers. The SIA can be one to four digits.
Note 6: a, aa, and aaaa are numbers. The SIA can be one to four digits.
Note 7: iii and iiii are used IDs. The SIA can be one to four digits.
Note 8: nn, nnn, and nnnn are condition parameters. The SIA can be one to four
digits.
Note 9: For the 4/2 code, P is a programmable digit for each input point.
To Next Page
Loading...
