Bosch DCN Next Generation - Example Layouts

Example layouts
The number and type of devices that make the optical network give the layout of the optical
network. This chapter shows examples of the possible layouts of optical networks.
Basic optical network
The below figure is an example of a basic optical network.
DCN-CCU2
DCN-WAP
Figure 4.13: Basic optical network
Extended optical network
The below figure is an example of a extended optical network.
DCN-CCU2
LBB4404/00
INT-TX
PRS-4DEX4
DCN-WAP
Figure 4.14: Extended optical network
Redundant optical network
If the cable between the central control unit (DCN-CCU2) and the audio expander
(LBB4402/00) breaks, the central control unit cannot transmit data to the audio expander. A
solution for this problem is to use a redundant cable.
4.2.9
Conference System Planning | en 83
Bosch Security Systems B.V. Operation Manual 2013.11 | V2.0 | DCN-NG_OM_V4.x