The memory is situated inside the device and is non‐volatile. As a consequence,
an error which has occurred and has not been cleared by the user will remain in
the error memory even after a power cycle. The error state will then reflect if the
error is still active or not.
An error is deleted from the list when
▪ the user actively clears the error memory
▪ the user updates the firmware
The error memory is not cleared by a configuration download and is not cleared
by a power cycle.
Clearing the error memory
There are two ways of clearing the error memory, both are shown in the follow‐
ing illustration:
12.2.2
12 | Error Memory
114 / 136 DDU S2 PLUS Manual Bosch Motorsport
To Next Page
Loading...
