Clone the Unit
To replace a DDU 8 by another device, it is possible to clone it. A clone is a 1:1
copy of a device.
Create a clone file
1. Click ‘Clone extract’ in Extras menu.
2. Choose the hardware device which should be cloned.
3. Define destination and filename.
4. Click ‘OK’ to start procedure.
Change the device
1. Click ‘Clone apply’ in Extras menu.
2. Choose clone file.
3. Click ‘Ok’.
Please remember that following properties are not stored into the clone:
▪ Lifetime of device
▪ Serial number
▪ Upgrade features
14
14 | Clone the Unit
124 / 136 DDU S2 PLUS Manual Bosch Motorsport
To Next Page
Loading...
