Firmware
Firmware and configuration
DDU 8 holds 4 types of data:
Firmware: the software (PST program file) of the DDU 8.
Configuration: the configuration of Input channels, CAN I/O, PWM, display con‐
figuration, recording + telemetry configuration.
Calibration data: Characteristic curves and offsets created by online calibration at
the vehicle.
Recorded data: Measurement data recorded during vehicle operation.
Firmware update
The scheme shows the process during each connection between RaceCon and
DDU 8.
13
13.1
13.2
Firmware | 13
Bosch Motorsport DDU S2 PLUS Manual 121 / 136
To Next Page
Loading...
