Technical Data
The display DDU S2 PLUS integrates a programmable full color TFT screen for
motorsport applications. It allows for synchronized acquisition and visualization
of analogue and digital input channels as well as input via CAN. The DDU S2
PLUS can be used as stand alone display or in combination with the Bosch ECU
family. It can be combined e.g. as copilot display with Bosch DDU 7 or DDU 8.
Additional devices can be connected via Ethernet and CAN buses. CAN in and
out is freely configurable.
Application
Display ▪ 5,7” graphic color display
▪ 12 user configurable display pages
▪ 10 multicolor freely configurable
(RGB) LEDs
Resolution 640 x 480 pixel
Supported image file formats bmp, gif, jpg, png, tif
Converters 8 kHz AD converters with digital low
pass filter
Configurable math channels
User configurable CAN in/out messages
Sampling rate Max. 1,000 Hz for all channels
RS232 GPS input
Mechanical Data
Size 148 x 126 x 32 mm
4
Technical Data | 4
Bosch Motorsport DDU S2 PLUS Manual 7 / 136
To Next Page
Loading...
