Power Supply
Bosch Motorsport software is developed for Windows system software. Connect
the Ethernet line to your computer and install the driver. Read the manual care‐
fully and follow the application hints step by step.
Please ensure that you have a good ground installation. That means:
▪ A ground that has a solid, low resistance connection to the negative battery
terminal
▪ Connection should be free from dirt, grease, paint, anodizing, etc..
▪ Use large diameter wire
▪ More metal‐to‐metal contact is better!
The following notations for power signals are used:
▪ KL 15 is a switched battery rail controlled by the IGN‐switch
▪ KL 30 is an unswitched battery positive rail (same as battery positive terminal)
▪ KL 31 is an unswitched ground rail (same as battery negative terminal)
Be careful to observe current limits of wires and connector pins!
2
Power Supply | 2
Bosch Motorsport DDU S2 PLUS Manual 5 / 136
To Next Page
Loading...
