Bosch PRA-CSE - Reset to Factory Default; Approvals

PRAESENSA Multifunction power supply, large | PRA-MPS3 | en 125
Bosch Security Systems B.V. Installation manual 2019.11 | V1.00 |
11.5.11 Reset to factory default
The reset switch resets the device to its factory default settings. This function is only to be
used in case a secured device is removed from a system to become part of another system.
See Device status and reset, page 51.
11.6 Approvals
Emergency standard certifications
Europe EN54‑16
EN54‑4
International ISO7240‑16
ISO7240‑4
Regulatory areas
Safety EN/IEC/CSA/UL 62368‑1
Immunity EN55024
EN55103‑2 (E1, E2, E3)
EN50130‑4
Emissions EN55032
EN61000-3-2
EN61000-3-3
EN61000‑6‑3
ICES‑003
ANSIC63.4
FCC‑47 part15B classA
Conformity declarations
Europe CE/CPR
Environment RoHS