Bosch PRA-CSE - Mounting; Reset to Factory Default; Approvals

PRAESENSA LCD call station | PRA-CSLD, PRA-CSLW | en 139
Bosch Security Systems B.V. Installation manual 2019.11 | V1.00 |
12.5.7 Mounting
The call station and call station extension enclosures have two rear M4‑threaded inserts of
5mm depth to facilitate fixing the devices to a plate for horizontal or vertical mounting on a
desktop or against a wall.
!
Caution!
The call station and its extensions are suitable for vertical mounting below 2m height.
12.5.8 Reset to factory default
The reset switch resets the device to its factory default settings. This function is only to be
used in case a secured device is removed from a system to become part of another system.
See Device status and reset, page 51.
12.6 Approvals
Emergency standard certifications
Europe EN54‑16
International ISO7240‑16
Regulatory areas
Safety EN/IEC/CSA/UL 62368‑1
Immunity EN55024
EN55103‑2 (E1, E2, E3)
EN50130‑4
Emissions EN55032
EN61000‑6‑3
ICES‑003
ANSIC63.4
FCC‑47 part15B classA
Conformity declarations
Europe CE/CPR
Environment RoHS