PRAESENSA System controller | PRA-SCL/SCM/SCS | en 57
Bosch Security Systems B.V. Installation manual 2019.11 | V1.00 |
Quantity Component
1 Set of 19"‑rack mounting brackets (pre‑mounted)
1 Set of screw connectors and cables
1 Quick Installation Guide
1 Important Product Information
No tools, SD‑card or Ethernet cables are provided with the device.
Parts check and identification
A System controller
B 2‑pole screw plug (x2)
C 2‑conductor cable (x2)
D Wire‑end ferrules (x8)
7.6.2 Memory card
The SD memory card is optional and only used for call recording. Messages and tone files are
stored in the internal memory.
Notice!
In a live system, do not remove the SD memory card while the system controller is accessing
the card; this is indicated by the green busy-indicator.
Removal of the card while busy may corrupt the card’s file system.
For IP30 ingress protection compliance, the system controller is delivered with a plastic
dummy SD card in the memory card slot. The dummy card must be removed before a real SD
memory card can be inserted. If no SD memory card is used, leave the dummy SD card in
place.
1. Use an SD memory card with a maximum size of 32GB.
2. Disable write-protection of the card.
3. Insert the SD memory card in the slot.
To Next Page
Loading...
Need help?
General
